欢迎来到华丰科技,主要产品有 色差仪 超声波测厚仪 硬度计 光泽仪 涂层测厚仪 其他物理检测仪器...

美国Taber磨耗测试仪6160

作者:设备部 来源: 日期:2012-7-20 14:54:45 人气: 标签:磨耗仪 磨耗测试 进口磨耗仪

美国  Taber  公司
型号: 6160(6100)

该仪器适用于测试塑料、汽车配件、橡胶、皮革和纺织、电镀、自由拆卸的组件、漆品、印刷图样等产品的耐磨损性能。既能用于评估产品的耐磨性,又能用于评价产品的耐刮伤性 ( 单次或多次刮擦 ) 和颜色的传递性。干磨耗测试、湿磨耗测试均可进行。
它能够测试任何尺寸大小或任何形状的样品,对于带轮廓表面和抛光表面特性产品的磨耗测试极为理想 ( 如:电脑鼠标和其它电脑或 IT 产品塑胶面漆耐磨性测试 ) 。
仪器描述
该仪器的磨头能自由浮动,划杆可以作线性运动,这个 " 自由浮动 " 的磨头能沿着样品的轮廓移动 - 无论是曲面还是平面的。
为了使你能模拟真实的使用条件,可设置各种的参数以适应不同的情况。 Taber 的线性磨耗测试仪能选择 行程、速度、载重和循环次数等 。
通过选择不同的 磨耗介质和配件,磨耗仪能适应客户特定的、精确测试的要求。
一般磨头其大小、形状如同铅笔末端的橡皮擦头,是用高质量的磨耗材质制作而成。能确保测试的稳定 性。另外可选择样品固定台与其它附加配件,以适合刮伤、破损程度测定以及耐酒精测试、耐硬币刮擦等的测定。

线性磨耗测试仪符合 CE 标准,具有 CE 安全标识
特点: 5 种可选的移动距离
· 标准移动距离 0.5", 1", 2" 3" 和 4"
· 可订做特殊的移动距离
2 ~ 75 来回 / 分钟的可调移动速度
其中 2, 15, 25, 30, 40 和 60 来回 / 分钟这六个速度,已经在操作面板上预设了 6 个按钮。
可设置测试程序
· 可最多设置 999,999 来回(注意,磨头橡皮在此期间可能需要更换)
激光导引测试样品的摆放位置,确保测试的准确性。

可选择载重
· 标准载重范围从 350g 到 2100g ( 一般随机配置 250g 重量的砝码 3 个。 )
· 各种可选的重量的砝码
· 背光显示屏


 The TABER® Oscillating Abrasion Tester - Model 6160 is best known as an "oscillating sand tester". Described in ASTM F735 (Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method), the oscillating sand tester is used to measure the relative abrasion resistance of a material to surface abrasion and / or marring. The primary application of the Oscillating Sand Abrasion Tester is for transparent materials and coatings utilized in windows and lenses, but it might also be used to evaluate organic paints & coatings, plastics, metals and other materials.

Test parameters can be altered with Taber's Oscillating Sand Abrasion Tester, and allow the operator to select the operating stroke length (6.5 to 150 mm) and speed (variable from 100 - 200 cycles per minute). ASTM F735 specifies the sand tray travels a distance of 100mm at a speed of 300 strokes per minute.
In addition to the dry abrasion test, the oscillating sand abrasion tester may be used with abrasive slurry to perform erosion tests. For this application, the optional 4 inch deep tray is suggested along with a specimen tray cover. In place of the abradant, a slurry would be used (e.g. 50 - 50 mixture of solids and distilled water). The abrasivity of the slurry is dependent on the concentration of the solids in the liquid vehicle, along with the characteristics of the solid particles (shape, hardness, size, and friability).
Using a custom specimen holder (not supplied), materials of various shapes may also be tested. To generate useful data, it is important to recognize that the amount and force of abrasive media that contacts the specimen surface will change based on the curvature of the part. Specimens with a severe contour may inhibit the movement of the abrasive media during the test.

An optional kit is available to conduct the Bayer Abrasion Test on contoured lenses. This set-up involves testing a specimen against a control lens for comparative purposes.


Oscillating Abrasion Tester Includes:
Specimen Tray with Integrated Holder 样品支架
Specimen Spacers (set of 8)   样品盒
4/10 Silica Abrasive Media (50 lb.)  研磨剂
6” Rule 规尺
Spirit Bubble Level  水平气泡
Specimen Removal Tool 样品夹
Disposable Specimen Tray Cover 一次性样品托盘盖


Optional:

Customized HF279864  Bayer 金钢砂

Customized HF279892  镜片夹具

Customized HF279897  标准耐磨镜片

Please contact us for more information.